简体中文 
Español 
English AIMA-FT3E-Q HD
The 1310 nm Forward Transmitter Module – Enhanced High Density series (FT3E-Q HD) is designed to plug into PBN’s latest generation Advanced Intelligent Multi-services Access platform – the AIMA3000.
PBN AIMA3000 FT3E-Q HD series advanced forward transmitter is available in quad-port configurations. It is designed for multi-services operators (MSOs) to increase network capacity to satisfy an ever-growing subscriber demand for more bandwidth. The FT3E-Q HD Multi Quantum Well (MQW) Distributed Feedback (DFB) laser transmitter module allows for full-spectrum analog/digital broadcast and narrowcast channels over the entire 1218 MHz space, which provides utmost flexibility for MSOs during the all-digital transition.
The laser transmitter module is available in optical power levels from 2 dBm to 14 dBm (1.6 mW to 25 mW). The module offers a superior frequency response, as well as an extremely low distortion profile and low noise characteristics. The FT3E-Q HD incorporates specialized circuitry to deliver the best possible CTB and CSO performance of up to 1218 MHz. It employs the latest in broadband linear amplifier technology. In addition, it has a cutting-edge optoelectronic design for the delivery of high-quality transmissions, in both analog and digital formats, over passive fiber-optical networks.
DOCSIS 3.1 Compatible with operating bandwidth up to 1218 MHz
Plug-and-play with the AIMA3000 platform
High-quality 1310 nm, isolated MQW DFB laser with advanced RF driver circuitry
RF amplifier gain blocks with advanced GaAs technology for better performance
Frequency response of 45 MHz to 1218 MHz for both broadcast and narrowcast applications
Can be locally managed through an Ethernet port
The input port of NC can be terminated electronically
Alarm monitoring through PBN's NMSE and ASMM Web Interface
Automatic gain control (AGC) for a consistent optical modulation index (OMI)
Automatic thermo-cooler control (ATC) for a consistent laser temperature
Automatic power control (APC) for a consistent optical output power
Up to 64 transmitters in a 4RU chassis
Remote firmware upgrade and auto upload/download of configuration files through ASMM web interface or using PBN’s NMSE
1 MCX RF input with eletric controled attenuator and equalizer for broadcast
Fully FCC, CE, and RCM compliant
| Optical Performance | |
| Optical wavelength | 1310 nm ± 10 nm |
| Optical outputs | 4 |
| Output power | 2 dBm to 14 dBm |
| Optical connector | SC/APC, FC/APC, LC/APC, E2000/APC |
| RF Performance | |
| RF bandwidth | 45 MHz to 1218 MHz |
| RF flatness | ± 0.75 dB |
| RF input return loss | > 16 dB |
| RF input level, NC nominal (1) | 23 dBmV per channel (119 ch QAM256) |
| RF input level, BC nominal (1) | 13 dBmV per channel (119 ch QAM256) |
| Slope control (NC & BC) |
-11 to +1 dB |
| AGC range | ± 3 dB |
| Isolation of NC and BC | > 45 dB |
| RF impedance | 75 Ω |
| RF test point relative to RF input port | -20 dB ± 1 dB |
| Isolation between transmitters | > 65 dB |
| RF input connectors | 8 x MCX connectors for NC, 1 MCX connector for BC |
| RF test points | 4 x Mini-SMB (2) |
| Alarms and laser status | Front-panel LEDs, SNMP Traps |
| Link Performance | ||||
| CENELEC 42 (3) | Full QAM + OFDM (4) | 30NTSC Analog+QAM (5) | 77NTSC Analog+QAM (6) | |
| CNR | 52 dB | 51 dB | 51 dB | |
| CSO | 65 dB | 63 dB | 62 dB | |
| CTB | 70 dB | 67 dB | 65 dB | |
| MER | 42 dB | 39 dB | 38 dB | |
| BER | 1.00E-09 | 1.00E-09 | 1.00E-09 | |
| General | |
| Power supply | Powered via AIMA3000 backplane |
| Power consumption | < 28.0 W |
| Operating temperature | -5 ℃ to +55℃ |
| Storage temperature | -25℃ to +70℃ |
| Operating humidity | 90% (non-condensing) |
| Storage humidity | 90% (non-condensing) |
| Dimensions (WxDxH) | 24.6 x 410 x 152.5 mm |
| Weight | 0.88 kg |
| Supported network management options | PBN’s NMSE or through ASMM’s Web Interface |
Notes:
(1) dBuV=60+dBmV
(2) Measure RF input before the laser.
(3) CNR, CSO, CTB are loaded with CENELEC 42 (23dBmV/channel to BC). All are measured with PBN reference optical receiver with 20 km single-mode optical fiber 0 dBm.
(4) MER and BER are loaded with full digital 256 QAM 119 ch QAM Annex A (QAM 25dBmV/channel to BC), from 266 MHz to 1210 MHz. All are measured with PBN reference optical receiver with 10 km single-mode optical fiber 0 dBm.
(5) 30NTSC Analog 55~83MHz, 121~261MHz (21dBmV). Digital QAM 256 Annex B 273~999MHz, OFDM 1100MHz (15dBmV).
(6) 77NTSC Analog 55~83MHz, 121~547MHz (19dBmV). Digital QAM 256 Annex B 555~999MHz, OFDM 1100MHz (13dBmV).
| A-FT3E-Q-[V]-[W]-[X1X2][Y][Z] | 1310 nm Forward Transmitter – Enhanced High Density |
| Options: | |
| V | Optical Output Power (1) |
| 02
04 06 08 09 10 11 12 13 14 |
2 dBm (1.6 mW) optical power
4 dBm (2.5 mW) optical power 6 dBm (4 mW) optical power 8 dBm (6.3 mW) optical power 9 dBm (8 mW) optical power 10 dBm (10 mW) optical power 11 dBm (13 mW) optical power 12 dBm (16 mW) optical power 13 dBm (20 mW) optical power 14 dBm (25 mW) optical power |
| W |
Narrowcast input connector |
| HD | 8 MCX connectors for narrowcast, 1 MCX connectors for broadcast |
| X1X2 (2)(3) | First Channel Last Channel |
| O-Band DWDM (4)
O1 O2 O3 O4 O5 O6 O7 O8 |
1325.782 1327.249 1329.220 1330.459 1318.060 1321.254 1323.003 1324.170 |
| Y | Optical Connector Type |
| S
F L E |
SC/APC
FC/APC LC/APC E2000/APC |
| Z | Bandwidth |
| 12 | 45 ~ 1218MHz |
Notes:
(1) For O-Band DWDM application, the maximum optical output power is 12 dBm.
(2) X1X2 is for O-Band DWDM configurations only. Please omit X1X2 when making an order for non O-Band application scenarios, and the default optical wavelength is 1310nm±10nm.
(3) X2 is only used in dual transmitters versions and in this case X1 is the first channel, X2 is the second channel. For more wavelength configurations, please contact your PBN representatives.
(4) Please contact your PBN representatives for the latest lead-time of O-Band products.
