简体中文 
Español 
English AIMA-FRAS
The Analog Forward Receiver – Standard (FRAS) is designed to plug into PBN’s latest generation Advanced Intelligent Multi-services Access platform – the AIMA3000.
The FRAS is available in single port configurations. It incorporates a low noise front-end circuit that receives optical wavelengths from 1260 nm to 1620 nm and converts them into RF signals for Master Antenna Television (MATV), CATV, and broadband applications. The supported RF bandwidth is from 45 to 1218 MHz.
The FRAS offers a superior frequency response with a low distortion profile and low noise characteristics. Based on broadband detection, it features automatic gain control (AGC). Also it supports managing RF output AGC threshold level and the slope remotely.
With the optional embedded Full Band Capture (FBC) module, it enables the operator to capture and monitor the spectrum and QAM demodulation data, including level of each channel, SNR, MER, BER, constellation and so on. Operators can get the metric of each QAM channel remotely.
Plug-and-play with the AIMA3000 platform
Superior performance with a low noise profile and minimal distortion characteristics
High RF output for flexible deployment
Supports Automatic Gain Control (AGC) for a stable RF output
Electronic slope control
Electronic gain setting and AGC adjustable thresholds
Broadband GaAs amplifier technology
Support for CENELEC and NTSC standards up to 110 channels (analog and digital)
Comprehensive status monitoring and alarm with PBN's NMS network management software
SCTE-HMS MIB compliant
Remote firmware upgrade and auto upload/download of configuration files through ASMM web interface or using PBN’s NMSE
Bulk firmware updates through PBN's NMSE
Fully FCC, CE, and RCM compliant
| Optical Performance | |
| Optical wavelength | 1260 nm to 1620 nm |
| Optical input | -5 dBm to +3 dBm |
| Optical return loss | > 50 dB |
| Optical connector | SC/APC, FC/APC, LC/APC, E2000/APC |
| RF Performance | |
| RF bandwidth | 45 MHz to 1218 MHz |
| RF output level (1) |
40 dBmV (2) |
| RF flatness | ± 0.75 dB |
| Gain adjustment | 0 dB to 20 dB |
| Slope adjustment | 0 dB to 7 dB |
| AGC range (input variation) | 10 dB |
| AGC accuracy | ± 0.5 dB |
| RF impedance | 75 Ω |
| RF return loss | ≥ 16 dB (3) |
| RF test point relative to RF output port |
-20 dB ± 1 dB |
| RF OUT connector | GSK-type female |
| RF test points | Mini-SMB |
| Alarms and status | Front-panel LEDs, SNMP Traps |
| Link Performance (4) | |
| CNR | > 53 dB |
| CSO | > 65 dB |
| CTB | > 70 dB |
| General | |
| Power supply | Powered via AIMA3000 backplane |
| Power consumption | < 12 W (without FBC module) < 17 W (with FBC module) |
| Operating temperature | -5 ℃ to +55℃ |
| Storage temperature | -25℃ to +70℃ |
| Operating humidity | 90% (non-condensing) |
| Storage humidity | 90% (non-condensing) |
| Dimensions (WxDxH) | 24.6 x 410 x 152.5 mm |
| Weight | 0.88 kg |
| Supported network management options | PBN’s NMSE or through ASMM’s Web Interface |
| FBC Module | |
| Frequency capture range | 45 to 1000 MHz |
| Demodulation mode | QAM64, QAM256 |
| Metrics and functions available | Level, SNR, MER, BER and live spectrum |
Notes
(1) Measured in a typical system with 0 dBm optical input, 3% ~ 4% OMI.
(2) dBuV=60 + dBmV.
(3) Typical value is 16 dB on the whole frequency band. Minium value is 16 dB and above 40MHz -1 dB/octave.
(4) Loaded with 77 NTSC channels, measured with PBN referenced optical transmitter @ 0 dBm, 3%~4% OMI.
| A-FRAS-[W]-[X]-[Y]-[Z] | Analog Forward Receiver – Standard |
| Options: | |
| W | Number of Optical Ports |
| S | Single (1) |
| X | FBC Function |
| M | With FBC Management |
| Y | Optical Connector Type |
| S
F L E |
SC/APC
FC/APC LC/APC E2000/APC |
| Z | Bandwidth |
| 12 | 45 ~ 1218 MHz |
Note:
(1) Option for FBC Management configurations only. When using FBC function, the RF output power of the main port should be no less than 95 dBμV/ch for accurate measurement. Please omit X when select a model without FBC function.
