简体中文 
Español 
English AIMA-OPSW-12
The Optical A/B Protection Switch (OPSW) is designed to plug into PBN’s latest generation Advanced Intelligent Multi-services Access platform – the AIMA3000.
The high isolation and impedance matched optical switch is microprocessor controlled and will operate in standalone mode without the need of management software.
Switching is based on the measurement of optical and RF signals. These signals are compared to preconfigured minimum and maximum thresholds parameters stored in the firmware tables.
Manual operation of the OPSW or the configuration of the optical and RF thresholds can be set through the web interface using a through PBN’s NMSE management software.
Plug-and-play with the AIMA3000 platform
Three adjustable input levels to suit different optical input ranges: High: +10 dBm ~ +25 dBm (251.18 mW ~ 316.22 mW); Middle: 0 dBm ~ +15 dBm (1 mW ~ 31.62 mW); Low: - 10 dBm ~ + 5 dBm (0.1 mW ~ 3.16 mW)
Fast switching time of 15 ms
Non-Revert and Revert operating modes with user-adjustable delay
Adjustable minimum thresholds of -10 dBm ~ +25 dBm on both inputs. Operators can define the maximum and minimum parameters for automated switching
Optical switching based on optical or RF power levels
Comprehensive status monitoring through the built-in web interface
Remote firmware upgrade and auto upload/download of configuration files through ASMM web interface or using PBN's NMSE
Bulk firmware updates through PBN's NMSE
Fully FCC, CE and RCM compliant
| Optical Performance | |
| Operating bandwidth | 1270 ~ 1630 nm |
| Input power range | -10 ~ +25 dBm |
| Insertion loss with connectors | 2 dB maximum |
| Switch accuracy of optical | < 0.5 dB |
| Optical crosstalk | 55 dB maximum |
| Optical return loss | 45 dB minimum |
| Optical connector type (with optical safety shutter) | SC/APC, FC/APC, LC/APC, E2000/APC |
| Alarms | Front-panel LEDs, SNMP Traps |
| Switching time |
< 15 ms |
| RF Performance (Test point on the front panel) | |
| RF power range (1) | 0 ~ 30 dBmV/ch, 77ch NTSC |
| Switch accuracy of RF | < 1 dB |
| RF connectors | < 75 Ω Mini-SMB |
| General | |
| Power supply | Powered via AIMA3000 backplane |
| Power consumption | < 6.0 W |
| Operating temperature | -5 ℃ to +55℃ |
| Storage temperature | -25℃ to +70℃ |
| Dimensions (WxDxH) | 24.6 x 402 x 152.5 mm |
| Weight | 0.88 kg |
| Supported network management options | PBN’s NMSE or through ASMM’s Web Interface |
Note:
(1) dBuV=60+dBmV
| A-OPSW-[Y]-12 | Optical A/B Protection Switch |
| Options: | |
| Y | Optical Connector Type |
| S
F L E |
SC/APC
FC/APC LC/APC E2000/APC |
