简体中文 
Español 
English AIMA-FT3S-Q
The 1310 nm Forward Transmitter Module – Standard series (FT3S-Q) is designed to plug into PBN’s latest generation Advanced Intelligent Multiservices Access platform – the AIMA3000.
PBN AIMA3000 FT3S-Q series advanced forward transmitter is available in a quadruple port configuration. It is designed for multi-services operators (MSOs) to increase network capacity to satisfy an ever-growing subscriber demand for more bandwidth. The FT3S-Q Multi Quantum Well (MQW) Distributed Feedback (DFB) laser transmitter module allows for full-spectrum analog/digital channels over the entire 1218 MHz space, which provides utmost flexibility for MSOs during the all-digital transition.
The laser transmitter module is available in optical power levels from 6 dBm to 14 dBm (4 mW to 25 mW). The module offers a superior frequency response, as well as an extremely low distortion profile and low noise characteristics. The FT3S-Q incorporates specialized circuitry to deliver the best possible CTB and CSO performance of up to 1218 MHz. It employs the latest in broadband linear amplifier technology. In addition, it has a cuttingedge optoelectronic design for the delivery of high-quality transmissions, in both analog and digital formats, over passive fiber-optical networks.
带宽范围 45 ~ 1218 MHz，支持广播和窄播双射频输入接口
Plug-and-play with the AIMA3000 platform
High-quality 1310 nm, isolated MQW DFB laser with advanced RF driver circuitry
采用先进砷化镓（GaAs）工艺制造的射频放大器增益模块，性能表现更优异
Supports CENELEC and NTSC standards up to 110 channels (both analog and digital)
Locally managed through the companion ASMM control card’s Ethernet port, for the AIMA3000 series chassis
Alarm monitoring through PBN's NMSE and ASMM Web Interface
支持自动增益控制 (AGC) 功能，提供稳定的光调制度 (OMI)
支持自动温控 (ATC) 功能，保证激光器长时间稳定工作
支持自动光功率控制 (APC) 功能，提供稳定的光功率输出
Available in a quadruple port configuration
Up to 64 transmitters in a 4RU chassis
Remote firmware upgrade and auto upload/download of configuration files through ASMM web interface or using PBN's NMSE
Fully FCC, CE, and RCM compliant
| Optical Performance | |
| Optical wavelength | 1310 nm ± 10 nm or CWDM |
| Optical outputs | 4 |
| Output power | 6 dBm to 14 dBm |
| Optical connector | SC/APC, FC/APC, LC/APC, E2000/APC |
| RF Performance | |
| RF bandwidth | 45 MHz to 1218 MHz |
| RF flatness | ± 0.75 dB |
| RF input return loss | > 16 dB |
| RF input level, nominal (1) | 13 dBmV per channel (117ch QAM256) |
| AGC range | ± 3 dB |
| RF impedance | 75 Ω |
| RF test point relative to RF input to laser | -20 dB ± 1 dB |
| Isolation between transmitters | 45 ~ 1218 MHz: > 65 dB |
| RF input connectors | 4 x GSK-type female |
| RF test points | 4 x Mini-SMB (2) |
| Alarms and laser status | Front-panel LEDs, SNMP Traps |
| Link Performance (4) | |
| NTSC+QAM (3) | |
| CNR | > 52 dB |
| CSO | > 63 dB |
| CTB | > 65 dB |
| MER | > 39 dB |
| BER | < 1E-9 |
| General | |
| Power supply | Powered via AIMA3000 backplane |
| Power consumption | < 24.0 W |
| Operating temperature | -5 ℃ to +55℃ |
| Storage temperature | -25 ℃ to +70 ℃ |
| Operating humidity | 90% (non-condensing) |
| Storage humidity | 90% (non-condensing) |
| Dimensions (WxDxH) | 24.6 x 410 x 152.5 mm |
| Weight | 0.95 kg |
| Supported network management options | PBN’s NMSE or through ASMM’s Web Interface |
Notes:
(1) dBuV=60+dBmV
(2) Four Mini-SMB connectors on front panel to measure RF input to laser @ -20 dB.
(3) Channel Loading: 30 NTSC + 117 channels QAM256 (ITU-T, J.83 Annex-A, 6dB below NTSC). All are measured with PBN reference optical receiver with 10km single-mode optical fiber 0dBm.
| A-FT3S-Q-[W]-[X1X2]-[Y]-[Z] | 1310 nm Forward Transmitter – Standard |
| 选项： | |
| W | Optical Output Power |
| 06
08 09 10 11 12 13 14 |
6 dBm (4 mW) optical power
8 dBm (6.3 mW) optical power 9 dBm (8 mW) optical power 10 dBm (10 mW) optical power 11 dBm (13 mW) optical power 12 dBm (16 mW) optical power 13 dBm (20 mW) optical power 14 dBm (25 mW) optical power |
| X1X2 (1)(2) | First Channel Last Channel |
| CWDM (3)
29 31 33 35 37 OBand WDM (4) A B C D E F G H |
1290 nm
1310 nm 1330 nm 1350 nm 1370 nm 1330.50 1329.20 1327.25 1325.80 1324.17 1323.00 1321.30 1318.10 |
| Y | Optical Connector Type |
| S
F L E |
SC/APC
FC/APC LC/APC E2000/APC |
| Z | Bandwidth |
| 1G | 45 ~ 1218MHz |
Notes:
(1) Default spacing of CWDM is 20 nm. For more wavelength configurations, please contact your PBN representatives.
(2) X1 is the first channel, X2 is the dual channel. Default spacing of the second and third channel is 20 nm.
(3) For CWDM configuration the maximum optical output power is 12dBm. It is recommend to be applied to QAM signal transmission. For other applications, please contact your PBN representatives.
(4) Please contact your PBN representatives for the latest lead-time of CWDM and O-band products.
