PBN

AIMA-FT3S-Q

1310 nm Forward Transmitter - Standard

X

AOCM3900 datasheet FT3S-Q Datasheet

AOCM3900 datasheet FT3S-Q Manual

 

* Login required for all downloads

AIMA-FT3S-Q

About the Product

The 1310 nm Forward Transmitter Module - Standard series (FT3S-Q) is designed to plug into PBN’s latest generation Advanced Intelligent Multiservices Access platform - the AIMA3000.

PBN AIMA3000 FT3S-Q series advanced forward transmitter is available in a quadruple port configuration. It is designed for multi-services operators (MSOs) to increase network capacity to satisfy an ever-growing subscriber demand for more bandwidth. The FT3S-Q Multi Quantum Well (MQW) Distributed Feedback (DFB) laser transmitter module allows for full-spectrum analog/digital channels over the entire 1218 MHz space, which provides utmost flexibility for MSOs during the all-digital transition.

The laser transmitter module is available in optical power levels from 6 dBm to 14 dBm (4 mW to 25 mW). The module offers a superior frequency response, as well as an extremely low distortion profile and low noise characteristics. The FT3S-Q incorporates specialized circuitry to deliver the best possible CTB and CSO performance of up to 1218 MHz. It employs the latest in broadband linear amplifier technology. In addition, it has a cuttingedge optoelectronic design for the delivery of high-quality transmissions, in both analog and digital formats, over passive fiber-optical networks.

  • DOCSIS 3.1 Compatible with operating bandwidth up to 1218 MHz
  • Plug-and-play with the AIMA3000 platform
  • High-quality 1310 nm, isolated MQW DFB laser with advanced RF driver circuitry
  • RF amplifier gain blocks with advanced GaAs technology for better performance
  • Supports CENELEC and NTSC standards up to 110 channels (both analog and digital)
  • Locally managed through the companion ASMM control card’s Ethernet port, for the AIMA3000 series chassis
  • Alarm monitoring through PBN's NMSE and ASMM Web Interface
  
  • Automatic gain control (AGC) for a consistent optical modulation index (OMI)
  • Automatic thermo-cooler control (ATC) for a consistent laser temperature
  • Automatic power control (APC) for a consistent optical output power
  • Available in a quadruple port configuration
  • Up to 64 transmitters in a 4RU chassis
  • Remote firmware upgrade and auto upload/download of configuration files through ASMM web interface or using PBN's NMSE
  • Fully FCC, CE, and RCM compliant
Optical Performance 
Optical wavelength   1310 nm ± 10 nm or CWDM
Optical outputs 4
Output power 6 dBm to 14 dBm
Optical connector SC/APC, FC/APC, LC/APC, E2000/APC
RF Performance
RF bandwidth 45 MHz to 1218 MHz
RF flatness ± 0.75 dB
RF input return loss > 16 dB 
RF input level, nominal (1) 13 dBmV per channel (117ch QAM256)
AGC range ± 3 dB
RF impedance 75 Ω
RF test point relative to RF input to laser -20 dB ± 1 dB
Isolation between transmitters 45 ~ 1218 MHz: > 65 dB
RF input connectors 4 x GSK-type female
RF test points 4 x Mini-SMB (2)
Alarms and laser status  Front-panel LEDs, SNMP Traps
Link Performance
  NTSC+QAM (3)
CNR > 52 dB
CSO > 63 dB
CTB > 65 dB
MER > 39 dB
BER < 1E-9
General
Power supply Powered via AIMA3000 backplane
Power consumption < 24.0 W
Operating temperature  -5 ℃ to +55℃
Storage temperature -25 ℃ to +70 ℃
Operating humidity 90% (non-condensing)
Storage humidity 90% (non-condensing)
Dimensions (WxDxH) 24.6 x 410 x 152.5 mm
Weight 0.95 kg
Supported network management options PBN's NMSE or through ASMM's Web Interface

Notes:

(1) dBuV=60+dBmV 
(2) Four Mini-SMB connectors on front panel to measure RF input to laser @ -20 dB.
(3) Channel Loading: 30 NTSC + 117 channels QAM256 (ITU-T, J.83 Annex-A, 6dB below NTSC). All are measured with PBN reference optical receiver with 10km single-mode optical fiber 0dBm.

A-FT3S-Q-[W]-[X1X2]-[Y]-[Z]

1310 nm Forward Transmitter - Standard

Options:

W

Optical Output Power

06

08

09

10

11

12

13

14

6 dBm (4 mW) optical power

8 dBm (6.3 mW) optical power

9 dBm (8 mW) optical power

10 dBm (10 mW) optical power

11 dBm (13 mW) optical power

12 dBm (16 mW) optical power

13 dBm (20 mW) optical power

14 dBm (25 mW) optical power

X1X2 (1)(2)

First Channel Last Channel

CWDM (3)

29

31

33

35

37

OBand WDM (4)

A

B

C

D

E

F

G

H

 

1290 nm

1310 nm

1330 nm

1350 nm

1370 nm

 

1330.50

1329.20

1327.25

1325.80

1324.17

1323.00

1321.30

1318.10

Y

Optical Connector Type

S

F

L

E

SC/APC

FC/APC

LC/APC

E2000/APC

Z

Bandwidth

12

45 ~ 1218MHz

Notes:

(1) Default spacing of CWDM is 20 nm. For more wavelength configurations, please contact your PBN representatives.
(2) X1 is the first channel, X2 is the dual channel. Default spacing of the second and third channel is 20 nm.
(3) For CWDM configuration the maximum optical output power is 12dBm. It is recommend to be applied to QAM signal transmission. For other applications, please contact your PBN representatives.
(4) Please contact your PBN representatives for the latest lead-time of CWDM and O-band products.